STUDIO ACOUSTIC WEDGE FOAM CORNER KIT BASS ABSORBERS

(12) Bass Absorbers 2-3/4" x 2-3/4" x 24"(4) Solid Blocks 2-3/4" x 2-3/4" x 2-3/4" (1) Can of 12 oz. spray adhesive glue "The winning bidder will receive a FREE gift to complement the Bass Absorber kit" This acoustical foam absorber is designed, to be mounted in upper room corners. With the help of one Foam Cube and three acoustic bass absorbers you can make your trihedral corners look outstanding . It is especially useful to trap bass that is more intense at the intersection of walls, like in large area rooms. The rolling pattern front provides increased area for greater sound absorption and it will smooth out low frequency room. MATERIAL: 2 lb Density Flame-retardant open-cell/Urethane-Ether Foam FEATURES: Make you room look amazing. It’s easy, and lightweight so that it can be quickly installed and look good at the same time. With this kit you do not have to cover the whole wall with acoustic tiles. You can group pieces together or separate the pieces, which will soundproof your room. APPLICATIONS: R esidential, Commercial, and Industrial Flammability : MVSS 302 Flame Tests, Flame-Retardant. High Frequency Noise Control: Contact us by Email COLOR: Charcoal Acoustic Bass Absorbers : This corner block is recommended in all rooms. It absorb low frequency sounds noise and prevent unwanted sound reflections and improve listening condition. Our Acoustic Wedge Kit is a wonderful product for absorbing sound waves, but do not mistake “sound absorption” for “sound blocking.” Acoustic foam will not block sound from going through it. To block sound you need heavy, dense material. Acoustic foam does help to make sound waves less, and are a good solution for sound absorption. This is why it is used to treat a room with a lot of echo or reverberation. It helps to create an acoustically “sound deadening” effect for rooms, with a lot of bouncing sound waves. For More information Call Ask For Caterina OR Christina 1925 W. Maple Troy, MI 48084 Email us at: Installation Tips If you apply our spray adhesive glue lightly, only on the back of the tiles this will leave a temporary bond. If you apply our adhesive glue to both the mounting surface and the back of the tiles this will leave a permanent bond. For a stronger permanent bond make sure you spray both surfaces and allow adhesive to dry and tacky before bonding. For clean cuts, try an electric knife instead of scissors or a utility knife. (Scissors and utility knives usually leave a jagged edge) Most customers glue tiles with silicone-based caulk. For portability, you could attach Velcro stripes or put double stick tape. There will be an additional fee for UPS shipping for Addresses such as Hawaii and Alaska read more